Ruroc RG2 Bedienungsanleitung Seite 9

If you notice any difficulties in the fitting of your helmet, please contact your
authorized RUROC dealer or customer service. Wear the helmet horizontally (fig. A).
It must not tilt forward (fig. B) or backwards (fig. C).
(Fig. A) (Fig. B) (Fig. C)
Warning: If the helmet is worn in the wrong position it can not provide you
the full protection and can result in serious injury or even death in case of an
accident.
Grab the helmet with both hands on the straps. Pull the straps gently outside to
enlarge the opening and slide the helmet onto your head. Put the helmet in a
horizontal position. When wearing the helmet, it should not move freely without
moving your scalp along with it. You can check this by holding the helmet firmly and
trying to move your head within the helmet. If the helmet moves freely choose the
next smaller size.
Close the buckle and tighten the chin strap so that it feels snug under your chin. Move
your head to check that you are still able to breath, talk and swallow normally. Adjust
straps if necessary. Do not wear the strap over the chin, nor use any additional chin
.9
cups or similar.