Ruroc RG2 Bedienungsanleitung Seite 14

LENS CLIP INSTRUCTIONS
1. Unclip the locks on either
side of the goggle/lens.
4. Align the new lens with
the frame of the goggles
and allow the magnet to pull
the lens into place.
2. Gently push the lens
from the inside of the
goggle. Once the magnet
disconnects, remove the
original lens.
5. Secure both locks by
pressing on them until a
'click' is heard.
3. Ensure that the
protective film is removed
from the new lens.