Ruroc RG2 Bedienungsanleitung Seite 13

MASK
For the best fit, place your goggles on before you fit the mask and ensure they
are fitted behind it. To do this, place the goggle strap in your hands and adjust the
goggles so they sit between the mask and rim of the helmet.
To fit your RG2 mask securely and comfortably, place the helmet without the mask on
your head. Next, take the mask in both hands with your fingers on the open latches.
Bring the mask towards your mouth and jaw to cover your face, and use your fingers
to locate the magnetic connection points at the corner of the helmet. The magnets
should auto connect and secure the mask in place without you having to hold it.
Finally, close the latches on both sides of the mask until they snap shut.
RG2 mask must sit flush with helmet edge at all times, if the latches do not lock then
mask will be incorrectly positioned.
To disconnect the mask, hook your fingers underneath the latches on either side of
the helmet and snap them open. From here, pull the mask away from the magnetic
fitment points. Holding the mask in both hands use your fingers to locate the on-
helmet connection points.
.13