ATOMSTACK HURRICANE Bedienungsanleitung Seite 14

2.2 To clean the focusing lens, remove the protective cover, then rotate the Z-axis motor nut to lower the Z-axis module. Unscrew the quickly
detachable nut on the lens, then use a small suction cup to remove the lens. Clean the focusing lens with a dust-free cloth and anhydrous
ethanol. After cleaning, use the suction cup to place the lens back into position with the convex side facing down, and secure it by tightening
the quickly detachable nut;
2.3 You can directly use a lint-free cloth dipped in anhydrous ethanol to clean the third mirror.
1
3. Cooling water replacement
Recommended frequency: Once a month;
Water quality requirement: Pure water (If in cold areas, during cold season, to avoid freezing of cooling water at night at 0°C, please add
antifreeze.) Refer to the USB stick video or official website for replacement method: https: //www.atomstack.com/pages/hurricane-guide.
4. Camera lens cleaning
Suggested cleaning frequency:
Tools: Dust-free cloth + anhydrous ethanol;
Cleaning Method: Use a dust-free cloth soaked with an appropriate amount of anhydrous ethanol to wipe the lens.
2
Once a week;
3
13