Maintenance Of Machine - Atomstack Hurricane Bedienungsanleitung

Water temperature
and water level
2
Indication of light output
Flame Detection
10

Maintenance Of Machine

1. Dual axis core cleaning
Suggested cleaning frequency:
Wipe the upper and lower optical axis cleaning tool
dust-free cloth + anhydrous ethanol;
Cleaning Method: Use a dust-free cloth soaked with an appropriate
amount of anhydrous ethanol to wipe the upper and lower shafts.
Steady blue
Steady yellow
Flashing red
Steady blue
Steady blue
Flashing red
Once a week;
：
Normal.
Water temperature water level too high or too low warning.
Water temperature lever is too high or too low and need to make the adjustment to the normal water level.
Emitting normally.
Normal.
Flame detected.
2. Lens cleaning
Suggested cleaning frequency:
Cleaning tools：dust-free cloth + anhydrous ethanol;
Cleaning Method:
2.1 When cleaning the second mirror, you can rotate to remove the lens
dust cartridge and then clean the mirror；
12
Twice a week;