Camera Calibration Method; Indicator Introduction - Atomstack Hurricane Bedienungsanleitung

08

Camera Calibration Method

1. Open the top lid: Open the top lid (Check the pic at the right side)
2. Calibrate the camera: Please refer to the manual of the software in the USB or
the official website:http: //www.atomstack.com/pages/hurricane-guide
3. Using the camera positioning function.
4. Close the top lid and start working.
09

Indicator Introduction

1
1
1 2 3
2 2
Status
1
light
1. Water temperature and water level:
indicator, when the yellow light appears, take protective measures in advance , in order to
prevent damage to the machine.
2. Indication of light:
3. Flame sensing function:
machine.
Steady blue
Standby, the machine is working well.
Flashing blue
Performing a task.
Steady yellow
Task paused.
Flashing red
Exceptions occur or trigger alarm.
Coolant water level and water temperature status
The blue light indicates that the laser is operating normally.
Red light blinking means a flame in the processing space of the
11