Hercules DJControl Mix Ultra Benutzerhandbuch Seite 42

Effects (FX)
An effect is a filter or a combination of filters applied to a
track to modify its sound (echo, reverb...).
1. To enter FX mode, press the FX button. The FX
button's light stays lit up.
2. To apply an effect, press and hold a pad.
− Effect applied: pad lit up.
− No effect applied: pad not lit up.
To apply an effect, you can only use the performance
pads corresponding to the deck on which the track is
being played.
In djay, it is possible to apply other effects:
1. Display djay in landscape format.
2. Tap the button, then tap
41
.