Philips RO ADD6921 Bedienungsanleitung Seite 10

Rinsing
(Takes approximately 1.5 hours or more)
For optimal performance, it is recommended to follow these steps of membrane rinsing for the
new dispenser before its initial use or after replacing the �lter. This process typically takes
approximately 1.5 hours.
To prevent the growth of microorganisms, place the product in a location that avoids
direct sunlight.
(1) Remove the tap water tank lid and lift the tank
updwards; �ll the tap water tank with tap water
and place it back to the machine, then place the
lid back to the tap water tank properly.
Please make sure the tap water tank is fully
attached to the back panel, otherwise, it will
cause improper water �ltration or water
leakage.
(2) After installing the �ltered water jug, long press
the " " button for 5 seconds. When you hear
a "beep" sound, it indicates that the machine is
working.
5s
10
1
2
3