Cleaning The Condenser; Cleaning The Drum - fors TP 8359 Benutzerhandbuch

4. To continue the programme press the
Start/Pause button.

Cleaning the condenser

If the symbol
condenser (Kondensator)
flashes on the display, inspect the
condenser and its compartment. If it is
dirty, clean it. Do the check not less than
once a 6 months.
WARNING! Do not touch the
metal surface with bare hands.
Risk of injury. Wear protective
gloves. Clean carefully to avoid
damaging the metal surface.
To inspect:
1. Open the door. Pull the filter up.
2. Open the condenser cover.
3. Turn the lever to unlock the condenser
lid.
4. Lower the condenser lid.
5. If necessary, remove the fluff from the
condenser and its compartment. You
can use a wet cloth and/or a vacuum
cleaner with a brush attachment.
6. Close the condenser lid.
7. Turn the lever until it clicks into position.
8. Put the filter back.

Cleaning the drum

WARNING! Disconnect the
appliance before you clean it.
Use a standard neutral soap detergent to
clean the inner surface of the drum and
drum lifters. Dry the cleaned surfaces with a
soft cloth.
CAUTION! Do not use abrasive
materials or steel wool to clean
the drum.
Cleaning the control panel and
housing
Use a standard neutral soap detergent to
clean the control panel and housing.
Use a moist cloth to clean. Dry the cleaned
surfaces with a soft cloth.
17