Care And Cleaning; Cleaning The Filter; Emptying The Water Container - fors TP 8359 Benutzerhandbuch

16

CARE AND CLEANING

Cleaning the filter

At the end of each cycle the
symbol comes on the display and you must
clean the filter.
The filter collects the fluff during
the drying cycle.
1. Open the door. Pull the filter up.
2. Push the hook to open the filter.
3. Use a moist hand to clean both parts of
the filter.
4. If necessary, clean the filter with a
vacuum cleaner. Close the filter.
5. If necessary, remove fluff from the filter
socket and gasket. You can use a
vacuum cleaner. Place the filter back
inside the filter socket.
filter (Sieb)

Emptying the water container

Empty the condensed water container after
each drying cycle.
If the condensed water container is full, the
programme stops automatically. The
tank (Behälter) symbol comes on the
display and you must empty the water
container.
To empty the water container:
1. Pull the water container out keeping it in
a horizontal position.
2. Pull the plastic connection out and drain
the water into a basin or equivalent
receptacle.
3. Push the plastic connection back in and
place the water container back into
position.