Brightwell BrightLogic Kurzanleitung Seite 10

FORMULA
The BrightLogic laundry Formula Select module (optional)
programs, program names can be displayed by uploading via the computer program
The Formula Select module can also be used to prime and stop the pumps.
The desired program
before beginning the wash cycle.
Resetting options
There are four options available to reset the formula select:
Reset Formula to Program 01 - (default setting)
Reset Formula to Program 00 - (blank program)
Reset Formula to Program02
Reset Formula to Previous program
The unit can be manually reset by pressing the up and down keys together for 1 second.
With out a Formula Select
If no there is no formula select installed then the programs can still be selecting from the unit itself.
From the default screen press the PROGRAM
FORMULA
Fit the module to a suitable surface, in an accessible area, using the self-adhesive
Before fitting, please ensure that the power to the unit has been isolated.
Open the lid ofthe main enclosure
Pass the cable through the gland situated on the bottom of the unit and run it to the vicinity of the Formula Select
connection socket on the board (bottom right).
Note:
Screened cable should
Red
Black
Yellow
White
Green
Blue
Fit the green connector
socket and tighten the gland to grip the cable.
REMOVE links LK3 & Lk4.
BRIGHTLOGIC LAUNDRY SYSTEMS
SELECT - OPERATION
must be selected, using the UP and DOWN keys on the module
- (set to any program number)
- (resets to the previous program)
module
SELECT - INSTALLATION
be used.
aaaaa
with the coloured wires in the order shown above.
allows remote selection
button to toggle to the correct program
00000
SOLATED
of up to 20 different wash
and pressing
Velcro provided.
REMOVE
LK3 and
Plug the connector into the correct
ENGLISH
enter,
LK4