CLEANING
1. Before you clean the appliance, switch the appliance off and remove the plug from the socket.
2. Unscrew the screw ring and remove all parts of the attachment.
3. All the accessories and bowl can be cleaned in the dishwasher!
4. While using the appliance, always keep the contact pins at the bottom of the bowl clean
and dry! Wipe the contact pins at the bottom of the bowl with a dry cloth!
5. Never use pointed or sharp objects for cleaning as this may damage functional parts or
affect the safety of the appliance.
6. The blade is very sharp! Handle it with care!
7. Wash all parts in hot soapy water. Clean them immediately after use. Rinse them with
clear hot water and dry them immediately.
8. We advise you to lubricate the blade with some vegetable oil.
9. Only wipe the main appliance with a damp soft cloth!
10. AUTO CLEAN FUNCTION: If the bowl and blade is hard to clean, you may add some hot
soapy water in the bowl and run the appliance at speed 1 for few seconds.
11. When there is burn mark on blender jug bottom, put some citric acid or lemons into
water, heat 5 minutes, and then remove the burn mark with a mop.
RESET TEMPERATURE CONTROL
If the temperature gets over and the jug does not work, please press the temperature
button to reset temperature control. After cooling the jug, it can work as normally.
PRODUCT DISPOSAL
This product complies with European Directive 2012/19/EU on electrical and
electronic devices, known as WEEE (Waste Electrical and Electronic Equipment),
establishing the legal framework applicable in the European Union for the dis-
posal and reuse of waste electronic and electrical devices. Do not dispose of this
product in the bin, instead take it to the electrical and electronic waste collection
center closest to your home
30
BUTTON