FS KVM-0802IP Schnellstartanleitung Seite 10

Grounding the Switch
1. Connect one end of the grounding wire to a proper earth ground, such as the rack in which the
KVM switch is mounted.
2. Secure the grounding lug to the grounding point on the KVM switch's back panel with the washers
and screw.
Connecting to the RJ45 Ports
1. Connect an Ethernet cable to the RJ45 port of the KVM switch.
2. Connect the other end of the Ethernet cable to the RJ45 port of the supplied RJ45 to the VGA
interface module and then connect the VGA port of the module to a server or computer.
9