Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Replacing the fuse
If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Open the fuseholder on the rear panel with a fitting screwdriver.
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply:
Power consumption:
Beam angle:
Number of LEDs:
Type of LED:
DMX control channels:
DMX512 connection:
Sound-control:
Dimensions (LxWxH):
Weight:
Maximum ambient temperature T
Maximum housing temperature T
Min. distance from flammable surfaces:
Min. distance to lighted object:
Fuse:
Accessory:
EUROLITE DMX LED Operator 1
EUROLITE DMX LED Operator 4
EUROLITE DMX LED Operator IR2DMX
EUROLITE LED PC-Control 512
EUROLITE LED PC-Control 1024
Please note: Every information is subject to change without prior notice. 06.04.2011 ©
All manuals and user guides at all-guides.com
230 V AC, 50 Hz ~
180 W
approx. 25°
16
3 W, TCL
5/6/9/15/27/48/51
3-pin XLR
via built-in microphone
1000 x 170 x 90 mm
6.5 kg
:
45° C
a
(steady state):
60° C
C
0.5 m
0.1 m
F 2 A, 250 V
No. 70064501
No. 70064504
No. 70064511
No. 51860150
No. 51860160
32/32
00058997.DOC, Version 1.0
Werbung
