Scan To File - HP Designjet SD Pro Scanner Einführende Informationen

6. Select the output size.
a. Press the Copy tab.
b. Press the Output Size
c. Select the size that you want for your output copy.
d. If you want to change the settings for any of these options, or want to create a custom-paper size, press the Tool
button. To save the changes or the custom-paper size, press the
If you have selected an output size that differs from the input size, the scanner calculates the scaling percentage
and displays it with the
percentage by pressing the
and entering a scale percentage.
7. Set the number of copies.
a. Press the Copies
b. Enter the number of copies in the Edit field.
This option allows you to leave the system working unattended.
8. Press the Copy button to begin copying with the settings you have configured.
Press the Stop button to cancel the current preview or copy process.
Press the Reset button to clear the settings you have configured and reset the program to the default values.

Scan to file

1. Place the document with the top edge of the original in the scanner insertion slot. Feed the original into the scanner.
Align the center of the document with the center of the insertion slot.
2. Select the Scan tab, and then configure the scan settings, which are described in the following steps.
Output settings such as margins, layout, and media profile can be configured later, when you print the file.
3. Select Color or B&W
4. Select the type-of-original template that best describes your original.
5. Select the scan resolution.
a. In the Scan tab, press the
b. Select the print quality, which may be Fast,
you select Auto.
c. Choose among various scan-quality options:
• Set the scan resolution, or select Auto. If you select Auto, a suitable scan resolution is chosen automatically,
taking the print resolution into consideration; and the chosen scan resolution is displayed.
• Select Descreen
• Select Turbo
dpi.
6. Use the Size and Resize
None to maintain the size of the original.
If you want to change the settings for any of these options, or want to create a custom-paper size, press the
button. To save the changes or the custom-paper size, press the
7. The default filename is MyImage<00X> where is "X" is a number counter. To change the default name, press the
Name button and enter a new name.
8. Press Settings > File Name
9. Press the File destination
file to an email address (a network connection is required). The Change Folder dialog box appears.
button. The Output Size dialog box appears.
Scale button in the Copy
Scale button and selecting a predefined scale percentage, or by pressing the
button if you want to make more than one copy of the loaded document.
scanning.
Scan resolution
to increase print quality but reduce scanning speed.
to increase scanning speed but reduce print quality. It has no effect at resolutions below 300
options to define the dimensions of your scanned image. You can use
> File Format to select the output-file format. Various format options are available.
button to select the folder to which the scanned file is saved or email to send the scanned
New
tab after the first preview. Alternatively, you can specify a scaling
button.
Normal or Best. This is used only to determine the scan resolution if
New button and enter a name for it.
button and enter a name for it.
Size: Auto
Introductory Information
Tool button
and Resize:
Tool
File
6