Specifications - HP DesignJet T830 Einführende Informationen

Message or code
Scanner paper jam
Scanner dust detected
Scanner out of memory
0001-0001
0081-0008
0001-0082
0021-0059, 0021-0017
0021-0161
0041-0017, 0042-0117
0079-0000
0085-XXXX
0086-0008
0009-XXXX

Specifications

Power specifications
Input voltage
Frequency
Maximum current
Maximum power
Environmental specifications
Operating temperature
Operating humidity
Storage temperature
Acoustic specifications
Sound pressure
Recommendation
Open scanner cover and clear the jam.
Scanner cleaning is recommended.
Scan at a lower resolution and/or increase compression.
See the user guide for more information.
Restart the printer.
There may be a paper or carriage jam. Check and clear the
paper path if necessary.
The battery of the real-time clock has expired; contact HP
Support.
Service station error. There may be a paper or carriage
jam. Check and clear the paper path if necessary and
restart the printer.
Service station error. Restart the printer.
There may be a paper or carriage jam. Check and clear the
paper path if necessary.
Restart the printer. If the problem persists, update the
firmware.
Feeding paper problem. Restart the printer.
There may be a paper or carriage jam. Check and clear the
paper path if necessary. Also clean the carriage encoder
strip.
Scanner error. Restart the printer.
∼100–240 V
50/60 Hz
1.2 A
35 W
5 to 40°C (41 to 104°F)
20 to 80% RH
−25 to 55°C (−13 to 131°F)
Active
48 dB(A)
Standby
< 16 dB(A)
Introductory Information 5