The Front Panel - HP DesignJet T830 Einführende Informationen

• Do not handle the power cord with wet hands. Doing so may cause electric shock hazard.
• Observe all warnings and instructions marked on the product.
Equipment operation
• Do not allow metal or liquids (except those used in HP Cleaning kits or specified in the user's documentation) to touch
the internal parts of the equipment. Doing so may cause fire, electric shock, or other serious hazards.
• Do not insert your hand into the equipment while it is printing. Moving parts inside the equipment may cause injuries.
• Keep your clothing and all parts of your body away from the equipment's moving parts.
• Avoid wearing necklaces, bracelets and other hanging objects.
• If your hair is long, try to secure it so that it will not fall into the equipment.
• Ventilation measures, for your location either "office" or "copy, printer rooms" should meet with local environmental
health and safety (EHS) guidelines and regulations.
• Unplug the product from the wall before cleaning.
Equipment servicing
• There are no operator-serviceable parts inside the equipment except those covered by HP's Customer Self Repair
program: see http://www.hp.com/go/selfrepair/. Refer servicing of other parts to qualified service personnel.
• Do not disassemble or repair the equipment yourself. There are hazardous voltages inside the equipment that can
cause a fire or electric shock hazard.
Caution
Turn off the equipment and unplug the power cord from the power outlet in any of the following cases:
• If there is smoke or an unusual smell coming from the equipment.
• If the equipment is making an unusual noise not heard during normal operation.
• If a piece of metal or a liquid (not part of cleaning and maintenance routines) touches internal parts of the equipment.
• There is any mechanical or enclosure damage.
• During a thunderstorm.
• During a power failure.
• The power cord or plug is damaged.
• The equipment has been dropped.
• The equipment is not operating normally.

The front panel

The front panel is a touch-sensitive screen with a graphical user interface; it is located on the front left of the printer. It
gives you complete control of your printer: from the front panel, you can print, scan, copy, view information about the
printer, change printer settings, perform calibrations and tests, and so on. The front panel also displays alerts (warning
and error messages) when needed.
The front panel has a large central area to display dynamic information and icons. At the top of the central area there is a
dashboard that displays the Home screen icons. To interact with these icons swipe down the dashboard status to access
the dashboard.
On the left and right sides of the screen you can see up to four fixed icons at different times. Normally they are not all
displayed at the same time.
2 Introductory Information