Werbung
Verfügbare Sprachen
Verfügbare Sprachen
PAUSE
Pause the robot during cleaning by pressing Start/Pause button on the ro-
bot or on the remote control.
While the robot is paused, you can control the product's working direction
or working mode through the buttons on the remote control.
STOP
When cleaning is over, the product returns to the place where cleaning
started and beeps.
1. Remove the robot from the surface
Grab the handle and press Start/Pause for more than
5 seconds. Then, remove the product.
2. Turn the robot off
Move the switch button to the "O" position.
3. Remove the safety suction cup
30
4. Unplug the product from the power supply.
NOTE: when the product shows red light and beeps, please check if the power adapter is
connected correctly. When the power adapter is connected correctly, the product will show
a blue light and will start operating. When the power adapter is connected correctly, and
the product still shows a red light, please use the direction buttons on the remote control to
operate the product and move it from its current position, until the blue light shows up, press
Start/Pause keys on the remote control for the product to operate properly.
5"
CLEAN
5. CLEANING AND MAINTENANCE
When cleaning the mop cloth and the bottom parts of the product, please switch off the pro-
duct.
Clean mop cloth: Turn the robot over and remove the mop cloth, soak it in cool, clean water
for 2 minutes. Handwash with mild detergent and lay flat to dry. Let it dry completely before
attaching it again to the robot.
• Do not use a wet mop cloth on the robot or it may slip on the window.
• Washing the mop cloth regularly can extend its service life.
• If the pad becomes worn or no longer fits, replace it with a new one to achieve best cleaning
performance.
31
Werbung
