cecotec Conga WinDroid Excellence 970 Bedienungsanleitung Seite 15

Wipe the surface of the safety suction cup with the provided finishing cloth.
Spray cleaning solution
Spray the upper and lower sides of the mop cloth with the cleaning solution. After spraying,
wipe the bottom of the robot with a cloth.
4. OPERATION
Do not unplug the device from the power supply when the robot is working, otherwise, the
product may fall down.
START
1. Plug in the robot.
2. Let the battery charge between 1.5 and 2 hours before
using the robot.
3. Switch on the robot
Take the switch to the "-" position, the status light indicator will
turn on blue when the robot is turned on.
* Keep objects away from the robot 's fan to avoid blockage.
4. Place the robot on the glass
Place the robot on the window at least 10 cm (4") from window
28
corners or other obstacles. The robot has successfully attached to the window when the sta-
tus indicator light glows a continuous blue.
• Please ensure there is a 13-cm (5.1") free space between the glass and obstacles in the room
like curtains or furniture.
5. Start cleaning
There are two methods to start the robot:
• Press Start/Pause button on the robot or on remote control to start cleaning. Conga WinDroid
Excellence 970 automatically chooses "N" cleaning mode.
• Choose between N or Z mode on the remote control depending on the windows shape.
Use the remote control to start the product. N Cleaning Mode is best for tall windows. The
product will work under "N" mode.
Use the remote control to start the product. Z Cleaning Mode is best for wide windows. The
product will work under "Z" mode.
29