Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1) After switching on, the display shows the connection status on both universes. The signal status of input A
and the DMX mode at the assigned outputs is shown on the left side. The right side shows the same
information for input B and the assigned outputs.
X: no DMX signal
2) Press the encoder to call up the main menu. The display shows the following screen:
3) Turn the encoder to navigate through the seven options:
Input A
Input B
Merge
Outputs
DMX Error Alarm
Settings
Default Settings
4) Press the encoder to select an option.
5) Use the
button to cancel the setting procedure and go back one level.
Input A/B
1) This menu allows you to configure the settings and monitor the status of inputs A/B.
2) Turn and press the encoder to select an option.
MAIN MENU
~: weak DMX signal
√: DMX signal present
25 • EN
Werbung
