Moza Racing RS V2 Steering Wheel Benutzerhandbuch Seite 5

Installation of Paddle Approach Block
Place the steering wheel on a flat surface facing down, use a hexagonal wrench to remove
the screw on the side of the trigger lever of the shift paddle, and then use a wrench to lift
the latch from the side of the magnetic paddle, and pull the trigger lever of the paddle
outward to obtain the best space for disassembling and assembling paddles. Use a
hexagonal wrench to remove the screws on the shift paddles, put on the heightening block
and tighten with the long screws, and finally put the latch back in place and clamp screws.
The heightening block could help shorten the distance between the magnetic shifter paddles
and hands by 8mm.
Button Combination Functions
Utilize button combinations to adjust maximum steering angle, switch joystick modes,
configure dashboard UI interfaces, set base parameters, and more. Detailed instructions can
be found on the Steering Wheel Settings page.
5