Werbung
Verfügbare Sprachen
Verfügbare Sprachen
– For wood stud walls: This mount is designed to be mounted to 2" x 4" (50.8
x 101.6 mm) and Grade No. 2. wood studs. Wood studs should be 2" x 4"
(50.8 x 101.6 mm), at minimum: 1.5" x 3.5" (38 x 89 mm).
– This product should never be mounted to metal framing studs or bricks.
– If the mounting bracket will be attached to any structure other than specified
in this manual, only a licensed professional contractor/installer should
perform this installation. The supporting structure must support, at minimum,
4 times the combined weight of the mounting bracket and projector. It is
the responsibility and liability of the installer to ensure the suitability of the
supporting structure.
– Never install to furniture! This can lead to instability resulting in personal injuries
and/or damage.
•
Always support the projector with your hands when making adjustments. Make
sure to tighten screws and other connections well, but do not over-tighten them.
Never use an electric tool to tighten screws and nuts.
•
Once you have mounted the bracket and the projector, ensure they are sufficiently
secure and safe to use.
Before First Use
•
Check for transport damages.
DANGER
Cleaning and Maintenance
•
Periodically clean your mount with a dry cloth. Inspect all screws and hardware
at regular intervals to ensure that no connections have become loose over time.
Re-tighten as needed.
•
Users should check and maintain the product frequently to ensure the TV and
mount work normally, safely and securely. Make sure the screws are tightened
every two months.
Specifications
Maximum load:
Tilt range:
Swivel range:
Distance from ceiling:
4
Risk of suffocation! Keep any packaging materials away from
children – these materials are a potential source of danger, e.g.
suffocation.
33 lbs (15 kg)
-15° to 15° up/down
up to 360°
5" (12.8 cm)
Werbung
