Welcome Guide • English
IMPORTANT SAFEGUARDS
Read these instructions carefully and retain them for future use. If this
product is passed to a third party, then these instructions must be
included.
When using the product, basic safety precautions should always be followed to
reduce the risk of injury including the following:
CAUTION
This product is for indoor use only! Never use the mount outdoors!
CAUTION
This product is for private household use only and therefore may not
be used in public places like restaurants or hotels.
•
Read these instructions before you begin. If you are unsure about any part of the
process, contact a professional contractor or installer for assistance. Only use
the correct tools as noted in these instructions. Improper installation can result in
personal injuries and/or damage.
•
At least 2 people with technical knowledge are required for installing the mount
and projector. Keep children and pets away during installation, as they might
swallow small parts or packaging resulting in danger of choking/suffocation.
•
Use and install this product only according to the intended use as described
within these instructions. Misuse may lead to hazards resulting in potential
damage and personal injuries. Do not modify the structure of this product in any
way. The manufacturer cannot be made liable for direct or indirect damage or
personal injuries caused by incorrect mounting, incorrect use, modification to the
structure, or incorrect assembly. Keep the instruction manual in a safe place.
•
Refer to the instruction manual provided with the projector you are going to install
on this product. It includes additional information for the mounting, ventilation and
suitable mounting location. Compare the technical data and requirements to make
sure that this product is suitable for your projector.
•
IMPORTANT! Choose the right place to install the ceiling plate.
– For safety reasons, make sure the ceiling can support at least 4 times
the weight of the projector and the mount. The manufacturer takes no
responsibility for failure caused by walls of insufficient strength.
– The maximum wall covering thickness – such as gypsum drywall, lath, plastic,
etc. – should not be greater than 0.6" (16 mm) (wood stud walls).
– Do not mount to drywall alone.
– Examine the wall you want to install the mount to before you start installation.
Make sure that there are no hidden power supply cables, gas pipes, water
pipes or other objects hidden in the wall that might be hit by the drill, screws
or other hardware.
3