Werbung
9. Do not allow product to come into contact with oil-based foods (e.g. oil/
tomato based sauces) as staining may occur.
10. Before use, ensure that your hands and the breast pump are clean.
11. Do not turn the teat inside out for cleaning. Damage could result. Use a
teat brush.
12. For safety and hygiene reasons it is recommended that the feeding teat is
replaced at least every 2 months.
13. Do not use any accessories other than those supplied with this appliance.
14. Only use the adapter and USB cable supplied with this product.
15. Do not use while in transit.
5. Device description
The Tommee Tippee Wearable Breast Pump comes with everything you need to
prepare, pump, feed and store milk.
4
Parts of Tommee Tippee Wearable Breast Pump
Part
Single
A
1 x 24mm horn / flange
B
1 x 20mm horn / flange
C
2 x bra adjusters
D
1 x slow flow nipple / teat
E
1 x screw ring
F
1 x pump body
G
2 x upper lids
H
2 x diaphragm assemblies
I
2 x lower lids
J
2 x duck valves
K
2 x collector bottles
L
1 x USB charging cable
and multi-region plug
M
1 x carry bag
N
nipple size guide
O
1 x 17mm horn / flange insert
P
1 x 19mm horn / flange insert
Tip: Before using your pump for the first time, we recommend a full charge using
the cable and plug provided. To ensure you get the most comfortable fit and
optimized milk let down, we also recommend using the nipple fit guide included
to find which horn or insert size works for you.
Double
2 x 24mm horns / flanges
2 x 20mm horns / flanges
2 x bra adjusters
2 x slow flow nipples / teats
2 x screw rings
2 x pump bodies
4 x upper lids
4 x diaphragm assemblies
4 x lower lids
4 x duck valves
4 x collector bottles
1 x USB charging cable with 2
heads (shown opposite) and
multi-region plug
1 x carry bag
nipple size guide
2 x 17mm horn / flange inserts
2 x 19mm horn / flange inserts
5
Werbung
