The entire system must be checked for leaks, cleanliness and stability at least every three months. The
entire system should be serviced at intervals of approx. 5 years. In this case, all parts of the system must
be cleaned and their function checked.
Servicing should be carried out as follows:
Remove solid residues with a soft spatula
Clean surfaces and built-in parts with water
Remove all dirt completely from the shaft or filter basket
Check that all internal parts are firmly seated
Attention: The outlet must be checked and flushed if necessary at each service!
mail@graf.info
www.graf.info
6.
Inspection and servicing
www.graf.info
17 / 36
2024-10