Werbung
Verfügbare Sprachen
Verfügbare Sprachen
While working, the appropriate accident prevention regulations (in Germany BGV C22) must be followed.
For safety reasons, especially when entering the tank, it is important that a second person is present.
Furthermore, when carrying out assembly and installation work, inspection, maintenance and repairs, all
work regulations and norms must be followed. You will find the advice in the appropriate sections of these
instructions.
The installation of the system and/or single equipment parts must be carried out by a professional worker.
The complete system must always be out of operation and guarded against unauthorized use when
carrying out work on the plant or parts of the system.
The tank cover must always remain closed except when working in the tank, otherwise there is a very
high danger of accidents. The seating and condition of the cover must be checked on a regular basis.
The GRAF Company offers an extensive range of accessories that are all compatible with one another
and may be used to construct a complete system. The use of other manufacturers' accessories can impair
the function of the system and liability for any resulting damages will no longer be covered under the
guarantee.
2.1
Transport
During the transport the components of the filter system must be well secured against slipping or falling. If
the components are to be secured for transportation with webbing straps, it is to be ensured that they
remain undamaged.
Stress and excess loading caused by impact are to be avoided. Under no circumstances are the filters to
be rolled or slid over the ground surface.
2.2
Storage
Any necessary temporary storage of the filters must be on an appropriate level surface without sharp
objects. During the storage it is important to avoid damage caused by the surrounding environment or
foreign objects.
mail@graf.info
www.graf.info
1.
General notes
2.
Transport and storage
11 / 36
Werbung
