Wilson RAPTOR Serie Bedienungsanleitung Seite 3

HOME THEATRE
A home theatre systems typically
loudspeakers, a center channel loudspeaker
Main Speakers or Front Speakers
Front speakers in a home theatre system should be placed closer together
2-channel stereo application
We recommend they are positioned
away from the rear walls and at least 50cm away from any side walls
Center Channel
The Wilson Vocal centre channel loudspeaker should be positioned centrally between the front
loudspeakers, close to the television and ideally on a stable cabinet, shelf or wallbracket below
the screen.
Surround Channels
If the speakers are to be used for the surround
position them as illustrated
Surround speakers should be positioned
are to be wall mounted
they should be installed
closer to the listening
fig. I stereo
Sub
Connecting the loudspeakers
We recommend that you read the manual of your amplifier or AV-receiver carefully before
connecting your loudspeakers. All connections should be made with the amplifier switched off.
Fig. 2 illustrates connection.
Picture
Picture 1 is the common
Picture 2 is the standard bj-wiring
Picture 3 is the dual-amp
Note: With the bi-wiring
removed
APPLICATIONS
consist of front loudspeakers,
because the surround
at least 50 cm away from the TV screen, at least 30cm
in Fig. 2-4 according
and positioned more than 1,5 meter from the listening
at a height of about 1,8 meter. If they are to be placed on stands
area they should be positioned
fig. 2 surround 5.1
Sub
Right Loudspeaker
1 Picture
connection.
connection, using one amplifier.
bi-wiring connection,
connections of Picture 2 and 3, the terminal jumper
and a powered subwoofer.
channels tend to widen the image.
channels in a home theatre system,
to the number of channels.
slightly behind the primary listening
at roughly head level
fig. 3 surround 6.1
Sub
Left Loudspeaker
Receiver or Amplifier
2
using two identical amplifiers.
3
side and/or rear surround
than for
area. If they
area then
fig 4 surround 7 1
Sub
Picture 3
piece must be
EN