Ego Power+ HT5100E Bedienungsanleitung Seite 4

READ ALL INSTRUCTIONS!
EN
READ & UNDERSTAND
INSTRUCTION MANUAL
WARNING:
To ensure safety and reliability, all
repairs and replacements should be performed by a
qualified service technician.
SAFETY SYMBOLS
The purpose of safety symbols is to attract your attention
to possible dangers. The safety symbols and the
explanations with them deserve your careful attention
and understanding. The symbol warnings do not, by
themselves, eliminate any danger.
The instructions and warnings they give are no substitutes
for proper accident prevention measures.
WARNING:
Be sure to read and understand all
safety instructions in this Operator's Manual, including all
safety alert symbols such as "DANGER," "WARNING,"
and "CAUTION" before using this tool. Failure to follow all
instructions listed below may result in electric shock, fire,
and/or serious personal injury.
SYMBOL MEANING
SAFETY ALERT SYMBOL:
WARNING, or CAUTION. May be used in conjunction with
other symbols or pictographs.
WARNING:
The operation of any power tools can
result in foreign objects being thrown into your eyes, which
can result in severe eye damage. Before beginning power
tool operation, always wear safety goggles or safety glasses
with side shields and a full face shield when needed. We
recommend a Wide Vision Safety Mask for use over
eyeglasses or standard safety glasses with side shields.
SAFETY INSTRUCTIONS
This page depicts and describes safety symbols that may
appear on this product. Read, understand, and follow
all instructions on the machine before attempting to
assemble and operate.
4
56 VOLT LITHIUM-ION CORDLESS HEDGE TRIMMER — HT5100E / HT6500E
Indicates DANGER,
Indicates a potential personal
Safety Alert
injury hazard.
Read The
To reduce the risk of injury, user
Operator's
must read operator's manual.
Manual
Blade Length The length of the blade
XXcm
Ø33 mm
Cutting Capacity Max. Cutting capacity of the blade
Never attempt to operate your
power tool with one hand. Loss of
control of the power tool resulting
Keep hands and in serious or fatal injury may result.
feet away from To reduce the risk of cut injuries,
the cutting tool keep hands and feet away from
the cutting tool. Never attach a
moving cutting tool with your hand
or any other part of your body.
Always wear safety goggles or
Wear Eye safety glasses with side shields
Protection and a full face shield when
operating this product.
This product is in accordance with
CE
applicable EC directives.
This product is in accordance with
UKCA
applicable UK legislation.
Waste electrical products should
not be disposed of with household
WEEE
waste. Take to an authorized
recycler.
IPX4 IP Symbol Protection against water jets
V Volt Voltage
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watt Power
min Minutes Time
Alternating
Type of current
Current
Direct Current Type or a characteristic of current
n No Load Speed Rotational speed, at no load
0
... /min Per Minute Revolutions per minute
Strokes Per
SPM Stroke speed, at no load
Minute
Original instructions