Changing over the door
hinges
(If required)
Installation in numerical sequence.
1. Changing the door handle, Fig. 1/A
or Fig. 1/B (depending on model).
2. Changing over the door hinges Fig. 2
Attention! Carefully place the appliance
on its back.
Aligning the appliance
Fig. 4
Place the appliance in the designated
location and align.
Adjust the height adjustable feet with
a screwdriver.
Ventilation
Fig. 5
The air on the rear panel of the appliance
heats up. The warm air must be able to
escape. Otherwise, the refrigerator must
work harder. This will increase the power
consumption.
Therefore: Never cover or block ventilation
openings!
en
de
7