Attaching Flash Power Grip; And Camera (Camera Bracket 2); Attaching Flash - Minolta Power Grip 2 Set Bedienungsanleitung

ATTACHING FLASH, POWER GRIP, AND CAMERA (Camera Bracket 2)
Attaching flash
Power Grip 2 can be used with
Auto Electroflash 360PX,
320X, 320, or Macro 80PX.
Attach the flash unit to the power
grip as follows:
Make sure the flash's power
switch is off.
2.
Slide the flash'S mounting
straight back into the
grip's flash shoe and
power connector, making sure
it goes all the way in so all
flash and power grip contacts
Connect properly.
3. Turn the flash's clamp
wise to secure the unit.
280PX,
foot
power
flash
Camera Bracket
clock-
Auxiliary socket
Rewind-button
Camera positioning
Tripod socket
Camera attaching
Mounting index
either
of the camera by using the rever-
Sible Camera Bracket 2 and chang-
ing
attaching
screw, slide it to the far end of
the
unscrew
on the
2
acces
slo
screw
Power Grip 2 can be placed
on the right or left
the direction Of the camera
screw. To reverse
camera position ing slot and
it. Then screw it back
other side.
side
the
in