Panasonic NN-CD757 Bedienungsanleitung Seite 23

This feature allows you to pre-program your oven for regular reheating or cooking tasks. You are able to pre-program your oven for a
specific power level and time that is convenient for you. You are able to pre-program three memory tasks.
To set a Memory Program
M
Memory
• Press Memory Pad.
To use a Memory Program
M
Memory
• Press Memory Pad.
NOTE:
1. Auto programs cannot be programmed into memory.
2. Convection pre-heat mode cannot be programmed into memory.
3. Memory can only store 1 stage cooking. It is not possible to store 2 or 3 stage cooking.
4. Setting a new cooking program into memory will cancel the cooking program previously stored.
5. Memory program will be cancelled if the power supply is off or the plug gets disconnected.
En-20
Memory
• The oven is automatically
pre-set to memory 1. To
select memory 2 or 3, turn
Auto Menu Selector Dial
clockwise.
• The oven is automatically
pre-set to memory 1. To
select memory 2 or 3, turn
Auto Menu Selector Dial
clockwise.
Program the desired
cooking program.
Start
• Press Start Pad to begin
cooking.
M
Memory
• Press Memory Pad to
store this task or press
Start Pad to start cooking
in this sequence.