ROWENTA IN5011 Bedienungsanleitung Seite 10

EN
Installing your CLEAN IT
Carrying and positioning the appliance
Hold the
appliance by the
carry handle.
Filling the water tank
1 2 3
Remove the clean Open the water Fill the tank with cold water up to
water tank. tank cap. the mark
16 surface area to be cleaned (small/
large surface area)
Always position your
device on solid, level
ground for use.
Do not place the
product on a carpet
with piles longer than
10 mm.
4 5
Pour in the cleaner up
Close the cap and
according to the to the mark indicated.
reposition the water
Use only CLEAN IT
tank on the appliance.
cleaners.
Connecting the appliance and unwinding the hose
1 2
Before use, unwind the power cord fully Completely unwind the suction hose
and plug in the plug.
Using your CLEAN IT
Tip: Perform a
1
preliminary test on
a non-visible part of
the fabric you wish to
clean.
You can find all the
tips on page 21.
When the clean water
Turn on your appliance. Do not start
tank is empty, turn off the
the appliance without the water tanks
unit before removing the
properly fitted. Do not remove the
water tank to refill it.
tanks while the appliance is in use.
3
Clic
Attach the desired accessory to the hose cuff.
You will hear a click when it is in place.
2
3
Spray the water/cleaner Brush and vacuum the surface to be
mixture onto the stain by cleaned from top to bottom. Repeat
pressing the trigger. as many times as is needed to clean
the stain.
EN
17