Inhaltsverzeichnis; General Power Tool Safety Warnings - Keyang Cs235-20B Bersetzung Der Originalanweisungen

CS235-20B ELECTRIC CIRCULAR SAW
ELECTRIC CIRCULAR SAW
Original instructions
It is essential that instruction manual is read before
the power tool is operated for the first time.
Always keeps this instruction manual together with
the power tool. Ensure that the instruction manual
is with the power tool when it is given to other
persons.
Table of Contents
1. General Power Tool Safety Warnings .............. 1
2. Circular Saw Safety Warnings ......................... 2
3. Additional Safety Warnings .............................. 4
4. Check before Use ............................................ 4
5. Noise and Vibration Emissions ........................ 6
6. Specifications and List of Contents ................. 7
7. Description of Functions and Applications ....... 7
8. Operating Instructions ..................................... 7
9. Maintenance and Servicing ............................. 8
As our engineers are striving for the constant
research and development to develop the
quality of products, shape or structure of our
model can be changed without previous notice.

1. General Power Tool Safety Warnings

WARNING! Read all safety
warnings, instructions,
illustrations and specifications
provided with this power tool.
Failure to follow all instructions listed below may
result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers
to your mains-operated (corded) power tool or
Battery-operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive
Atmospheres, such as in the presence of
flammable liquids, gases or dust.
Power tools create sparks which may ignite the
dust or fumes.
c) Keep children and bystanders away
while operating a power tool.
[7741438] CS235-20B MULTI MANUAL(EN62841)_200831.indd 1 [7741438] CS235-20B MULTI MANUAL(EN62841)_200831.indd 1
Note
Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power tools.
Unmodified plugs and matching outlets will
reduce risk of electric shock.
b) Avoid body contact with earthed or
grounded surfaces, such as pipes, radiators,
ranges and refrigerators.
There is an increased risk of electric shock if
your body is earthed or grounded.
c) Do not expose power tools to rain or
wet conditions.
Water entering a power tool will
Increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil,
sharp edges or moving parts.
Damaged or entangled cords increase the risk
of electric shock.
e) When operating a power tool outdoors, use
an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces
the risk of electric shock.
f) If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply.
Use of an RCD reduces the risk of electric
shock.
3) Personal safety
a) Stay alert, watch what you are doing and
use common sense when operating a power
tool. Do not use a power tool while you are
tired or under the influence of drugs, alcohol
or medication.
A moment of inattention while operating power
tools may result in serious personal injury.
b) Use personal protective equipment.
Always wear eye protection.
Protective equipment such as dust
mask, non-skid safety shoes, hard
hat, or hearing protection used for
appropriate conditions will reduce
personal injuries.
c) Prevent unintentional starting. Ensure
the switch is in the off-position before
connecting to power source and/or battery
1
EN
2020-08-31 오후 1:00:31 2020-08-31 오후 1:00:31