Names And Functions Of Parts; Operating Buttons - Panasonic CZ-ESWC2 Bedienungsanleitung

Operating Buttons

A: PROGRAM button
B: PROG. COPY buttons
C: CLEAR button
D: Setting buttons
A: PROGRAM button
B: PROG. COPY buttons
C: CLEAR button
D: Setting buttons
E: HOLIDAY button
F: CANCEL button
G: TIMER OFF button
EN-4

Names and Functions of Parts

Use to start setting programs and to enter program settings.
Use to copy programs to groups or specifi c days in a schedule. (Refer to
page EN-12)
Press to clear the settings of the currently displayed program.
• The current program is not cleared unless the
after pressing the CLEAR button.
Use to make program settings and to set the present time.
Press to set groups for programmed operation.
Press to set today's day and days of programmed operation.
Press to set the present time and times used in programmed operation.
Use to start/stop indoor units via the timer.
Use to enable/disable remote controller operation via the timer.
Use to set programmed operation trigger time.
• Program settings are not entered unless the
the end of setting operations.
Press to set and cancel holidays during a scheduled week of operation.
Press to cancel the current program setting operation, copying operation or
holiday setting operation. When the CANCEL button is held down for 2
seconds, the current setting operation or copying operation is canceled and
the normal display returns.
Press to turn the timer OFF when timer operation will not be used for a long
period of time. When this button is held down for 2 seconds,
appears on the display. Programs cannot be run until the button is again held
down for 2 seconds.
• Some of the above features are disabled when the unit is installed. If the
button of a disabled feature is pressed,
For more information, contact your dealer.
E: HOLIDAY button
F: CANCEL button
G: TIMER OFF button
button is pressed
button is pressed at
appears on the display.