Panasonic CZ-ESWC2 Bedienungsanleitung Seite 13

STEP 4 Press the SET button to copy.
• Press the SET button and the program schedule
marker (
STEP 5 Select other copy destination days if desired.
• You can copy the selected source day program into
other days by repeatedly pressing the DAY button to
select a day of the week followed by the SET button
to set it.
NOTE
• Pressing the CLEAR button extinguishes the
program schedule marker (
copy operation.
STEP 6 Press the PROG. COPY DAY button to enter the
copied program in the selected days.
• The normal display returns.
NOTE
• If a program already exists in the copy destination day, the newly copied program overwrites the existing
program.
• If you accidentally copy over a program in the day program copy mode, holding down the CANCEL
button for more than 2 seconds returns the program to the point prior to pressing the PROG. COPY DAY
button in STEP 1. (All changes and copy operations made up until that point are cleared.)
) will be displayed.
) and cancels the
EN
EN-13