Panasonic CZ-ESWC2 Bedienungsanleitung Seite 14

How to Copy Group Programs
STEP 1 Press the PROG. COPY GROUP button.
• "CP-1" starts blinking in the present time display
area and "CP" (copy) starts blinking in the program
area to indicate the copy source.
STEP 2 Select a source group program to copy.
• Select a copy source group using the GROUP
button.
• Once having selected the copy source group, press
the SET button to set it. The display changes to key
you to select a copy destination group.
STEP 3 Select a copy destination group.
• After pressing the SET button, "CP-2" starts blinking
in the present time display area, the copy source
group No. set appears in the program
"PA" (paste) starts blinking in the program
to indicate the copy destination.
• Select a copy destination group using the GROUP
button.
STEP 4 Enter the selected copy destination group.
• When the SET button is pressed, the number of the
copy destination group appears in the program No.
area.
NOTE
• If a group from numbers 1 to 4 was selected as the
copy destination group, that number appears in the
program
was selected, that number appears in the program
area.
EN-14
area. If a group from numbers 5 to 8
area, and
area