Setting Errors - Panasonic CZ-ESWC2 Bedienungsanleitung

Setting Errors

If time is set as shown below while setting up a program, "ERROR" is displayed (the
Therefore, correct the time setting.
If Program Times Are the Same
STEP 1 Every time the SET button is pressed, the setting mode switches between programmed operations of
the same time setting (
STEP 2 Change the time setting with the HH and MM buttons so that the times are no longer the same.
STEP 3 Press the SET button and check "ERROR" is not displayed.
STEP 4 Press the PROGRAM button to end the setting mode.
Example Time Settings That Do Not Cause Errors
The below time settings do not generate an error.
1) When ON and OFF times are staggered
EN-10
and in the above example), therefore select the time setting to correct.
2) When OFF time is earlier than ON time
indication blinks).