How To Check Program Times - Panasonic CZ-ESWC2 Bedienungsanleitung

How to Check Program Times

You can check the programmed times for each group and day of the week.
STEP 1 Press the GROUP button and select a group whose
time you want to check.
NOTE
• Group selection is disabled depending on
installation conditions. If so, proceed to the next
step.
STEP 2 Press the DAY button.
• When the DAY button is pressed the fi rst time,
tomorrow's day of the week starts blinking and the
program settings for tomorrow are displayed.
• Every time the DAY button is pressed, the program
settings change in order of the days of the week.
• Pressing the GROUP button displays the program
settings of another group on that same day.
STEP 3 End checking.
• Press the CLEAR button. The normal display
returns.
NOTE
• Holding down the CANCEL button for more than 2
seconds also returns the normal display.
EN
EN-11