Werbung
Verfügbare Sprachen
Verfügbare Sprachen
14.6.1. Press [SET]. When "BW" flashes, short press (MODE] to set the
bandwidth
to be 1.70KHz,
14.6.2. Press [SET] twice, and the SQ setting (SQ.OFF/ON.OO) flashes.
Then, short press [MODE] to select SQ of (SQ.ON.OI —SQ.ON.09).
If the SQ OFF is not needed, when you short press [SET] for the second
time and the SO (SQ.ON.01—SQ.ON.09) flashes, please short press
(MODE) until (SQ.OFF.OO)is displayed. At this time, the SQ OFF will be
closed (Note: the SQ OFF is set to adjustable 9 levels and the level can be
selected according to actual demands.)
146.3. Press [SET] 3 times, ATT/DX,'LOCAUNORMAL flashing, and Press
IMODEI to choose the DX'LOCAUNORMAL.
-Then, short press (SET], ATT/DXJLOCAUNORMAL stop flashing to confirm
the current operation. DX/LOCAL} NORMAL will exit if there is no operation
within
five
seconds
setting.
14.7 UBD (Customized Receiving) Status:
14.7.1. Press [SET]. When "BWI' flashes, short press the [MODE) keyto set
the bandwidth
to be 1.70KHz,
14.7.2. Press [SET] twice, and the SQ (SQ.OFF/ON.OO) flashes. Then, short
press [MODE) to select SQ levels of (SQ.ON.01—SQ.ON.09).
press [SET], 'VOL SQ' stop flashing to confirm the current setting.
-If the SQ function is not required, press the above operation to switch to
VOL SQ OFF to turn OFF the automatic
14.7.3. Press [SET] 3 times, ATT/DX,'LOCAUNORMAL will flash, and then
short press [MODE] to select ATTIDX/LOCALJNORMAL setting.
-Press [SET]. ATT/DX\LOCAUNORMAL stops flashing. ATT/DX\LO-
CALINORMAL will exit if there is no operation within five seconds and the
work will be switched to be the current default setting.
14.7.4. Press [SET] 4 times, the first number in front of LIBD will flash.
-Press [MODE), and the display show the low-end "top" symbol. Press " t or
" to adjust the data, press [STEPI to move the cursor position, then press
" t or
" to set the desired low-end
-Short press [MODE) displays a high-end " top " symbol. Press [TUN" t or
to adjust the data, and press (STEP] to move the cursor position, then
press "
-Short press [SET] to confirm the setting. (Adjustable frequency range:
30MHZ-520MHZ)
1.WX(North American weather band):
WX has 7 fixed frequencies:
162.400MHZ,
162.4250MHZ,
162.5250MHZ,
4.50KHz,
and
the
work
4.50KHz,
"to set the desired high-end
162.4500MHZ,
162.5500MHZ
3.75KHz,
2.50KHz.
will
be
switched
3.75KHz,
noise function.
frequency range.
top" frequency range.
162.4750MHZ,
12
to be the
current
and 2.50KHz.
162.5000MHZ,
default
Werbung
