Retekess TR110 Bedienungsanleitung Seite 10

Press IMOMEI
-press [TUNE" t ,
-Long press [TUNE"
automatically, When a station is found, it Will stop searching and start to play
the searched station.
9. [BAND): band switch/automatic search and storage/alarm clock on/0ff
operation:
9.1: Band Switch:
In radio working state, press [BAND] to switch FM,'MW
9.2: Automatic station search and storage:
Long press [BAND] for 2s to start the automatic scanning and station
storage function,
-The radio Will search from the lowest frequency to the highest frequency in
the current receiving band and save the stations that have signal,
-It will automatically play the first station after completing the automatic
station search and storage
-During the automatic search, "PRESET" and "P x x x" flashes on the
display, and the frequency is changing rapidly,
-Note: -During the automatic search, press any key will stop the automatic
search.
-During automatic station search and storage, pre-stored stations will be
updated.
9.3: In time state: press the [BAND] button to tum onloff the alarm clock
(Refer to 8.2 for specific operations)
10.step/Delete [STEP] setting
10,1 In radio working state. press [STEP] to set the s value
The detailed step options are available in each band:
0 FMstep options:50.0KHZ, I O.OKHZ,IOO.OKHZ.
frequency: 522-171 OKHZ, step options:
AM frequency: 520-171 OKHZ, step options: IO.OKHZ, 5.0KHZ
SW step options:
@AIR step options: 25.0KHZ, 12.5KHZ, 8.3KHZ
5CB step options:5.00KHZ.I.OOKHZ. O .IOKHZ. O .02KHZ. 0 .01KHZ
1 .OKHZ
Once the step value is selected, the system will default to the last selected
step value. Press [TUN'
10.2 Delete station
In radio working state, after manually storing the station according to the
again to cancel the station selection operation,
button to increase
, radio Will enter the searching stations function
band
5.0KHZ, I.OOKHZ, O.IOKHZ,
step options: 25.0KHZ, 12.5KHZ, 7.5KHZ, 5.0KHZ,
. " to confirm the selected step value.
on the display.
or decrease
O.02KHZ,
07
the radio station
O.OIKHZ.