Herunterladen Diese Seite drucken

Retekess TR110 Bedienungsanleitung Seite 11

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 23
above 7.1 or automatic searching and saving the station according to the
above
9.2.
-Press [Memo), PRESET "Pxxx" shows on the display, press [TUN " t .
to select the desired station that you need to delete, long press [STEPI for
2s. "DEL & Exxx" flashes, press [STEPI to delete the current station.
-Within 5 seconds, press [STEP] to delete the next pre-stored station.
If no operation within 5 seconds, the radio will exit the Delete Station setting.
Or press (STEP] to exit the setting while PRESET *"is displayed.
11.Menu/Clock Settings
11 1.Time Sett'ng: In the shutdown state, long press [SET] for 2s, press
[SET], then press t orz "to enter the clock setting (refer to details in 8.1).
11.2.ln radio working state, press [SET] to enter menu setting (Refer to 14
for specific operations)
11.3.ln WX band, long press (SET] to activate ALERT function, the "SCAN"
flashes, long press (SET] to exit the Alert function.
Note:
SCAN
indicates
Alert state. If there is an Alert signal, sound or alarm will be given out.
12.Tuning Knob:
In radio working state: Rotate the knob to adjust frequency display bit
values. When adjusting the value, the corresponding "A" flashes. Press
[STEPI to select the desired value. Rotate the knob to quickly select the
desired frequency.
13.[MODE] Setting:
13.1. In radio working state, press (SET] to enter setting mode, press
IMODEI to select the corresponding sub-menu functions.
13.2. In short wave (SW) & Very-high frequency (VHF) & Aircraft (AIR) band,
in the standby mode, press (MODE] key to switch meter band functions.
13.2.1: In the short-wave (SW) receiving state, press [MODE) to switch the
meter band, and the frequencies are:
3.20000MHZ,
7.10000MHZ,
9.25000MHZ,
17.48000MHZ,
13.2.2: Press very high frequency (VHF) , then press (MODE] to switch
meter band and the frequencies are:
VHF30_OOMHZ,
UHF409MHZ,
UHF446_0620MHZ,
13.2.3: In the AIR receiving state, press the (MODE] to switch the meter
band and the frequencies are:
118.00MHZ,
123,00MHZ,
13.3. Pre-stored
After the 7.1 or 9.2 settings,
that
WX
3.75000MHZ,
3.90000MHZ,
11.50000MHZ,
18.90000MHZ,
VHF136.OOMHZ,
128.00MHZ,
Stations
Preview
is in the
state
of silent
4.75000MHZ,
3.57000MHZ,
21.45000MHZ,
VHF174.OOMHZ,
UHF462.5620,
133.00MHZ,
08
detection
of NOAA
5.73000MHZ,
15.03000MHZ,
25.67000MHZ
VHF220_OOMHZ,
UHF443.OO
138.00MHZ
"

Werbung

loading