Retekess TR110 Bedienungsanleitung Seite 12

-After storing stations in the the receive band(except WX Weather band for
North American countries), long press [MODE] for 2s to enter the preview
function. "Lxxx"
-It switches a station every 5 seconds; press any button to quit the preview
function.
Tips: After setting the desired radio station, long press the MODE button to
enter the preview mode, which will start from the current lowest stations and
switches a station every 5 seconds. You can press any key to quit preview
mode.
Radio stations without signal will be skipped automatically during
broadcasting. It is more helpful to find the designated radio station quickly
and realize the purpose of capturing the preset radio station quickly
13.4. Under the shutdown state, short press [MODE) to switch
Fahrenheit/Celsius.
14.Each band setting:
14.1 MW (medium wave) receiving state:
14.1.1. Press [SET]; bandwidth "BWI' flashing, short press [MODE] to set the
bandwidth 1.80kHz,
2.00kHz,
14.1.2. Press [SET] twice. When MW frequency 520KHz or 522KHz flashing,
short press the (MODE] to select 520KHz or 522KHz. Short press [SET] to
confirm. Default the current setting if there is no operation within five
seconds.
Display show 520 indicates that the mid-wave step value is 10kHz (or 5kHz)
and that the receiving range is between 520 kHz and 1710kHz.
Display show 522 indicates that the mid-wave step value in FM is 9kHz (or
3kHz) and that the receiving range is beueen 522 kHz and 171OkHz.
Note: In the United States, Canada,
American countries, the MW step value is set to 10 kHz (or 5 kHz). In other
countries, the MW step value is 9 kHz (3 kHz).
14.1.3. Press [SET] 3 times, ATT. (LOCAL) or (NORMAL) of ATT starts
flashing, then short press the MODE key to select DX/LOCAUNORMAL.
Then press [SET], and ATT DX/LOCAL/NORMAL will stop flashing.
It may exit (DX) or (LOCAL) to switch operations and default the current
setting if there is no operation within five seconds.
14.2 FM receiving state:
14.2.1 Press [SET]. Bandwidth "BIX flashes, short press [MODE] to set the
bandwidth to be 40KHz,
142.2. Press [SETI twice. FM frequency 64.00MHz, 76.00MHz, or 87.5MHz
flashes, press the [MODE) key to select 64.00MHZ, 76.00MHZ, and
87.50MHZ. Then Short press SET to confirm current settings. Default the
will flash.
1.00kHz, 6.00kHz,
110KHz,
4.00kHz,
Mexico, and other North and South
84KHz, and 60KHz.
09
3.00kHz, 2.50kHz, and