VEVOR HT-A2+ Bedienungsanleitung Seite 7

Problem caused by water condensation
Don't bring the instrument into low temperature environment from high
tempera-ture environment in a short time or from low temperature environ-
ment to high temperature environment. This may result in that the inside of
the instrument and appearance produce water condensation. In such
condition, the instrument should be placed into portable box or plastic bag.
Before use, make it restore to the environmental temperature and take it out
to use.If the product has water condensation inside, please power it off
immediately.Otherwise, the instrument may be damaged. Operation is not
allowed unless the water condensation disappears.
Avoid that the product is impacted (such as collision and
falling, etc).
Such operation may cause the product to be damaged. Please avoid such
operation.
Long-time storage and regular charging.
The product should be placed at a cool and dry environment if it not used for
a long time. If the product installed with battery is stored for a long time,
charging should be made regularly.
Otherwise, the battery will run out and the service life will be shortened.
Preliminary Acquaintance with Infrared
Thermal Imager
For a long time, infrared thermal imaging detection technology has become
an important means to ensure Industrial safety in developed countries.
Theapplication field includes electric power, metallurgy, petro-chemistry,
machinery,coal, traffic, fire control and national defense, etc. It can not only
carries out real-time detection at high voltage, high current and high speed
operation to perform real-time detection for production and instrument but
also need not power off the power supply, stop the machine or stop the
4