VEVOR HT-A2+ Bedienungsanleitung Seite 6

When the plug of the adapter or wire is damaged, stop
using immediately.
Don't change the battery unless the plug of the charger is inserted into
the socket completely.
Do not touch the electric wire with wet hands.
It is possible to cause electric shock when touching the electric wire with wet
hands. When pulling out the electric wire, hold the electric wire head rightly
to pull out the wire. Don't pull off the electric wire directly. Otherwise, the
electric wire may be broken, causing electric shock and fire.
Forbid dip the product into water caught in rain.
If the case contact with any liquid, please wipe it dry immediately. If water or
other liquid enters the inside of the instrument, please power off the power
supply at once.Continuous use may result in product damage.
Clean the dust on the adapter plug and the data line.
When it is exposed to dusty and dump environment for a long time, the dirt
surrounding the electric equipment will accumulate moisture. This may
cause short circuit and fire.
Please use the original adapter of the company to charge
the product.
The use of non-original power supply accessories may cause equipment
overheating, electric shot, fire, and leakage of chemicals inside the battery,-
explosion and other serious consequences.
Don't use abradant, isopropanol or solvent to clean the
enclosure of the device.
Such operation may cause the product case to be damaged.
The product temperature may increase after a long time of
charging.
You may feel scorching heat when the hands touch the sensors.
3