VEVOR HT-A2+ Bedienungsanleitung Seite 15

" SELECT/ENTER " key to determine not to save the image.
Video recording
In the normal startup and running interface, long press the capture button,
the screen will display the prompt "record video?" , if you want to select "Yes"
at this time, please press the "
start recording. If you want to select "No" , press the "SELECT/ENTER" key
to cancel the recording. Long press the capture key again to end the
recording.
The function to hide highest/lowest temperature column at
the screen bottom
Under the operation after normal start up, press " ▲ "key and the screen
bottom will display highest/lowest temperature column. Press " ▲ " can
also hide it.
LED lighting
Short press the capture button for about 2 seconds to turn on or off the LED
light.
Image output
The saved images through capture may be checked and output by connec-
ting with a computer through Micro USB.
Reading images
Open the USB protective cover, as shown in the front view of the product,
connect the Type-C USB cable to the USB port and then connect to the
computer to read the image or save it into the computer.
The supported operating system through verification includes: winxp,win7,
win 8, win10, win11 Apple system.
It is recommended that the USB cable attached to the unit or a better quality
USB cable be used.
/MENU" button or the capture button to
12