Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5. "
"icon, arbitrarily circle the thermal imaging map to take the
maximum temperature and the minimum temperature.
6. "
"Return icon, when an operation error occurs, you can click this
icon to return to the previous operation.
7. "
"Delete icon, when you select multiple temperature values and
need to cancel all of them, click Delete.
Troubleshooting
If you encounter with any problem when using the thermal image
device,please use the following table for repair.If the problems are not
solved, please cut off the power supply and contact with the manufacturer.
Failure phenomenon
The thermal imaging
device cannot start
The thermal imaging
device powers off
automatically
Failure cause
The battery is not
installed
The power of the battery
is used up
The power of the
battery is used up
The time set for
automatic power off
is due
34
Solution
Install the battery
Replace with new
battery or charge it
Replace with new
battery or charge it
Restart or change the
time for automatic power
off after restarting
(refer to 6.1)
Werbung
