2. Instructions for use
•
Do not use the platform without its guardrails or behind an unsecured door.
•
The surfaces where the platform is placed must be horizontal and not slippery.
•
All platform feet must be on the ground.
•
On soft ground, it is essential to place a plate under all the feet concerned.
•
Ensure that the work area is away from any live electrical conductors.
•
The platform must not be thrown or handled roughly when in use.
•
Always go up and down facing the platform.
•
Do not climb onto the support section.
•
Make sure you wear shoes that offer secure support.
•
Do not stand on the platform if you feel vertigo or if you are tired.
•
Do not use without stabilisers (see step 3).
•
Do not use the platform to transport any object.
•
When moving the product, make sure that the tool trays are empty, and nothing is placed on them.
•
The guardrail locks must be locked when the product is in use.
•
Remove tool trays when transporting on a roof rack.
3. Warranty conditions
For warranty conditions check www.altrex.com/warranty.
4. Repair and maintenance
Repairs and maintenance shall be carried out periodically by a competent person and
be in accordance with Altrex 's instructions.
NOTE A competent person is someone who has the skills to carry out repairs or maintenance,
e.g. by a training by Altrex.
•
For repair and replacement of parts, e.g. feet, if necessary contact Altrex or distributor.
Replacement parts supplied by Altrex must be assembled on the correct Altrex product and in the same way as the
part that is replaced. Assembly (attachment) and/or repair is effectuated at the own risk and expense of the client.
Altrex is not liable for damage caused by incorrect assembly and/or repair. Against payment, Altrex can be called in
for the repair of your product, and/or the assembly of the parts in question.
www.altrex.com
11
EN