Exsys EX-1188HMS-3-PL Anleitung

JUMPER SETTING
Jumper for power supply control:
The two jumpers Bus Power (JP2) and Host Control (JP1) can be used to configure the power
supply and power output at the downstream ports as required. The following settings can be
made:
Jumper JP1
ON
HOST
Settings Status
Jumper JP2 Jumper JP1 Power Host PC
Bus Power Host control
on off
ENA ON
(ble) (Power on)
off on
on off
DIS ON
(able) (Power on)
off on
on off
ENA HOST
(ble) (control)
off on
on off
DIS HOST
(able) (control)
off on
on on
DIS/ENA HOST/ON
off off
5
CONNECTIONS
USB 3.2 Gen 1 A-Port:
StdB_SSTX+
StdB_SSTX -
Jumper JP2
DIS
ENA
USB 3.2 Gen 1 B-Port:
StdB_SSTX
StdB_SST
D-
D+
Function +7V - 24V DC Terminal Block:
Hub Downstream
Data Power
no on
yes on
no on GND (Ground)
+7V - 24V
no off
no off
yes on
+7V - 24V DC-Connector:
no off
no off
yes on
2.1 mm
no off
-
+
HARDWARE INSTALLATION
As this is a PCBA for installation in customer applications, we are unable to provide you with
installation instructions. Please observe the necessary safety precautions during installation.
Germany:
EXSYS Vertriebs GmbH
Industriestrasse 8
61449 Steinbach
www.exsys.de
GND_DRAIN
StdB_SSTX+
Attention!
StdB_SSTX -
Never plug in with
force or in wrong
direction.
VCC GND
D- D+
GND_DRAI
StdB_SST
Attention!
StdB_SST
Never plug in with
force or in wrong
VBus
direction.
GN
ATTENTION!
Please pay attention to the correct polarity!
Never connect the power supply unit to the terminal
block when it is switched on!
ATTENTION!
5.5 mm
Only for use with the power supply included in the
scope of delivery or another compliant power supply!
ATTENTION!
When installing in your application, take the necessary ESD
precautions.
Switzerland: Italy:
EXSYS Vertriebs GmbH EXSYS Italia Srl
Dübendorfstrasse 17 Via Belvedere, 45/B
8602 Wangen I-22100 Como
www.exsys.ch www.exsys.it
6
EX-1188HMS-3-PL
Anleitung Anleitung
Vers. 1.0 / 30.09.24
AUFBAU
Jumper 1x USB 3.2 Gen 1
7-24V T-Block & DC-Buchse
Upstream B-Port
für optionales Netzteil Host Control
Betriebs LED
4x USB 3.2 Gen 1
Downstream A-Buchse
BESCHREIBUNG & TECHNISCHE DATEN
Das USB 3.2 Gen 1 Hub Board EX-1188HMS-3-PL ist ein voll funktionsfähiger industrieller USB
3.2 Hub mit sieben Downstream-Ports für die Integration in kundenspezifische Geräte,
Baugruppen oder Gehäuse. Er ist ideal für Embedded Systeme, Kioske, industrielle
Automatisierung und andere Spezialanwendungen, die mehrere USB-Anschlüsse benötigen.
Kompatibilität: USB 1.1, 2.0, 3.0, 3.1, 3.2
Betriebssysteme: Betriebssystemunabhängig, keine Software oder Treiber notwendig
Anschlüsse: 7x USB 3.2 Gen 1 A-Buchse, 1x USB 3.2 Gen 1 B-Buchse,
1x Terminal Block 7-24V DC, DC-Buchse 7-24V
Lieferumfang: EX-1188HMS-3-PL, Terminal Block
1
Jumper
Bus Power