Spring GN1/1 Gebrauchsanweisung Seite 19

7 Scope of delivery
The scope of delivery contains:
1 x Warming tray
1 x Operating instructions
8 Service/Maintenance
The service and maintenance are limited to the Cleaning as described in chapter 6.
9 Repairs
Repairs may be executed by the manufacturer or authorized personnel only. In case of questions contact your
local point of sale or our after sales service.
10 Troubleshooting
Disorder
The warming tray does
not heat.
Heat suddenly goes off
while keeping warm.
If you have any problems or questions, contact your local point of sale or directly:
Spring International GmbH
Höhscheider Weg 29
D-42699 Solingen
Germany
www.spring.ch
E-Mail: info@spring.ch
Possible cause
1. No supply voltage / insufficient
supply voltage.
2. Internal defect.
1. The warming tray is internally
overheated.
2. Internal defect.
Troubleshooting
1. Insert the mains plug of the device into
a suitable socket. Make sure that the
power outlet carries the required voltage.
Assure that the appliance is switched on.
2. The appliance is defective. Contact your
sales or service center.
1. Carefully remove the cookware / serving
dish from the ceramic surface and allow
the appliance to cool down.
2. The appliance is defective. Contact your
sales or service center.
19