Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5
Initial operation
Danger!
Observe the Installation site requirements described in chapter 5.1.
Caution!
Do not leave children unattended in the vicinity of the hot appliance.
Risk of burns or injury!
Using the warming tray results in high temperatures.
5.1
Installation site requirements
- Only place the warming tray on stable, level and heat-resistant surfaces. Keep the device out of the reach
of children.
- Do not place the warming tray next to or on hot surfaces (heating elements, hot stoves or other heat sources).
Make sure that there is enough space next to and above the warming tray.
- Keep a safe distance from flammable materials such as napkins, tablecloths, etc.
- Make sure that the power cord and/or any extension cord used does not come into contact with hot surfaces
on the appliance or cookware, other hot surfaces, such as cook tops or hot liquids. Ensure that it does not run
over sharp edges and is not pinched or kinked.
- Also make sure that the power cord and/or any extension cord used are routed to the appliance so that they
do not hang down and no one can trip over them or accidentally get caught or pull down the appliance.
5.2
Before the first use
- Read the instructions and safety guidelines carefully before using the device.
- Remove all packaging materials.
- Make sure that all parts are present as described in chapter 7 Scope of delivery and in proper condition.
- Wipe off the warming tray with a soft cloth, slightly damp, if necessary and dry it off thoroughly.
- Do not use any sharp or pointed objects, gasoline, solvent, scrubbing brushes, or abrasive cleaning agents
for cleaning.
5.3
Use
- Position the warming tray on a sturdy, level and heat-resistant surface. Make sure that it is always secure and
rests level on all four feet.
- Place the cookware/serving dish to keep the food warm carefully on the glass ceramic surface. Make sure
that the cookware/serving dish rests securely on the warming tray and does not protrude over the side of the
glass ceramic surface.
- Plug the power cord into a suitable socket according to Chapter 13 Technical specifications.
- Keep the button ON/OFF pressed to switch on the appliance.
- To select the temperature, keep the button + or – pressed until the figures blink.
17
Werbung
